Safety Instructions For Maintenance; Possible Malfunctions - Bartscher IW 35 Mode D'emploi

CAUTION!
Do not plug in nor use the unit without its filter, in order to avoid personal injury
and damage to the unit.
o Remove dirt and dust from the unit's ventilation openings (with a brush or
compressed air).
o To avoid damaging the unit, never clean it using substances containing gasoline or
solvents.
o Use only soft cloths for cleaning, never use harsh tools which may damage the
surface.
o After washing the device, dry and polish it with a soft, dry cloth.

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

Error
message
• The device becomes too hot
E01
• Parts are damaged (e.g.
Cause
(e.g. due to blocked
ventilation slots).
transistor).
Solution
• Clear/unblock ventilation slots.
Let the device cool off for a few
minutes; the device is ready for
operation afterwards. Contact the
retailer in case the error message
remains indicated in the display
after the device has cooled off.
• Contact retailer.
- 31 -