Setting The Time - Bartscher IW 35 Mode D'emploi

2. If you do not wish to use the power levels, you may select temperature
mode by pressing the Selection button
The unit will then shift into temperature mode and display
temperature 120 ° C .
(Temperature range: 60, 80, 100, 120, 140, 160, 180, 200,
220 and 240 ° C).
Using the buttons labeled
any time within a range of 60 ° C – 240 ° C at interv als of 20 ° C.
The LED temperature control light will come on
temperature range will be shown on the digital display.
The unit will heat food and maintain a constant temperature.
Power is automatically regulated.

Setting the time

After selecting the unit's working mode (power level or temperature range) press
The digital display will show the number „0" and the LED time regulator light will
come on .
Using the buttons
1-minute intervals, and from 30 – 180 minutes at 10-minute intervals.
The time is counted down by the minute, and the digital display will from time to time
show the previously-displayed messages (
After the set time has expired a signal will be heard, and the unit automatically switches
into Standby mode. The ventilator for cooling the unit's electronics will continue to work
for approx. 1 minute.
NOTE!
In Timer mode the time can be changed at any moment by pressing
The unit will automatically remain at the same power level or temperature.
The power level or temperature can be changed in the same way, without changing the
time settings.
NOTE!
If the time has not been set, the unit will automatically go off after 120 minutes.
and the unit can be set to function for up to 30 minutes at
/
and the temperature can be changed at
or ).
.
, and the selected
and
.
.
- 29 -