Bartscher IW 35 Mode D'emploi page 27

•
The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.
•
Never place the device or other objects on the power cable.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable.
Keep away the cable from operating range and do not dunk it into water.
WARNING! Hot external surface!
During operation some parts of the device become very hot. Do not touch the hot
surface of the glass field.
Please note: the induction cooker does not heat up itself during cooking, but the
temperature of the cookware heats up the cooking zone.
•
Do not use the device in case it does not function properly, has been damaged or
dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
WARNING! Hazard via electrical current!
Do not insert any objects like wires or tools into the ventilation slots.
This may cause electric shocks.
•
Do not move the induction cooker during cooking or with hot cookware on top of it.
•
Do not use the device as a surface for storing various items. Do not leave such
objects as empty containers, etc. on it.
•
We recommend not placing any metal kitchen utensils, cookware or pan lids, knives
or other metal objects on the cooking zone. These may heat up when the device is
turned on.
•
Remember that items of jewelry such as rings, watches etc. can get hot if they are
close to the heating surface.
•
The cooking zone's surface consists of temperature-resistant glass. In case of damage,
even if this concern only a small tear, disconnect the device from the power supply
immediately and contact the customer service.
•
Do not place any magnetically objects like credit cards, cassettes etc. on the glass
surface while the device is in operation.
•
On order to avoid overheating, do not place any aluminum foil or metal plates on the
device.
- 26 -