Quick Installation - Tripp-Lite SmartPro Serie Manuel De L'utilisateur

Quick Installation

1 Plug the UPS into an outlet
on a dedicated circuit.*
NOTE! after you plug the UPS into a live AC
outlet, the UPS will automatically charge its
batteries,** but will not supply power to its
outlets until it is turned ON (see Step 3
below).
* See Specifications for circuit amperage requirements.
Select models include an additional plug which can be
switched by a qualified electrician. See Specifications for
details. ** The BATTERY CHARGE LED will be the only
LED illuminated
2 Plug your equipment into
the UPS.
Note: Your UPS is designed to only support computer
equipment. You will overload the UPS if the total VA rat-
ings for all the equipment you connect exceeds the UPS's
Output Capacity (see Specifications). To find your equip-
ment's VA ratings, look on their nameplates. If the equip-
ment is listed in amps, multiply the number of amps by 120
to determine VA. (Example: 1 amp × 120 = 120 VA). If you
are unsure if you have overloaded the UPS's outlets, see
"OUTPUT LOAD LEVEL" LED description.
Turn the UPS ON.
3
Press and hold the "POWER" button for one
second. The alarm will beep once briefly after
one second has passed. Release the button.
1
2
3
3
EXTERNAL
BATTERY
NORM DELAY
SEE MANUAL FOR
PROPER CONNECTION