3Doodler PRO Mode D'emploi page 12

USING THE SMOOTHING TOOL
Step 1: While the 3Doodler PRO is unplugged and not
hot/warm, slide the Smoothing Tool (G) onto the nozzle
of the 3Doodler PRO.
Step 2: Turn on the 3Doodler PRO, selecting the
temperature setting appropriate to the material that
you are extruding.
Step 3: Use the Smoothing Tool to:
• Smooth out rough spots or edges
• Remove excess material from your Doodle
• Create contours or textures
Step 4: Turn off the 3Doodler PRO and allow it to cool
(for approximately five minutes) before removing the
Smoothing Tool.
11