Kohler K-1845 Guide D'installation page 9

Grip Rail
7. Install the Grip Rail
Carefully position the grip rail on the wall rail.
Align the holes in the grip rail and end cap.
Secure the grip rail to the end caps with supplied #6 x 3/8" screws, partially tightening the screws
to allow adjustment.
Align the holes in the grip rail and wall rail.
Secure the grip rail to the wall rail with five supplied #8 x 2" stainless steel screws.
Tighten the #6 x 3/8" screws.
Check to make sure the hand rail is secure and does not move when force is applied.
Kohler Co.
Grip Rail
Wall Rail
#8 x 2" Stainless Steel Screw
9
Wall Rail
End Cap
#6 x 3/8"
Grip Rail
Stainless
Steel Screw
Wall Rail
1091559-2-B