Step 4. Installing The Conduit - Samsung NE58K9850 Manuel D'utilisation Et D'installation

STEP 4. INSTALLING THE CONDUIT

Remove the conduit connection plate and rotate it as shown below.
The conduit hole (1
1. Prepare the conduit cord as shown in Figure 1.
2. Install the conduit cord as shown in Figure 2.
1"
3 wire
Knockout surface
Conduit connection plate
For conduit installations, insert the strain relief (not included) into the conduit hole
(1 / "). Then thread the conduit cord through the body of the strain relief and fasten
1
8
the ring. Reinstall the bracket.
Install_NE58H9970WS_AA_AC_DG68-00594A-05_EN+MES+CFR.indb 12
/ ") must be used.
1
8
Figure 1
/ " 1" /
3 3
8 8
3 / " 3 / "
1 1
2 2
4 wire
English - 12
1 / "
1
8
1 / "
3
8
"
1 / "
3
8
1 / "
1
8
Figure 2
Ring
Body
Strain relief
2017-08-11 6:28:42