Replacing The Oven Light; Removing And Re-Installing The Oven Door - Samsung NY58J9850WS Manuel D'utilisation

Masquer les pouces Voir aussi pour NY58J9850WS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Replacing the Oven Light

Oven light
The oven light is a standard 40-watt appliance bulb. It comes on when you open
the oven door.
Remove
Replace
Glass bulb cover
Bulb
CAUTION
To prevent electric shock, make sure the gas oven is turned off and cool
before replacing the oven light.
NOTES
The oven light does not operate during the self-cleaning cycle.
Remove the racks if they prevent you from accessing the oven light.
1.
Turn off the oven.
2.
Make sure the oven and oven light are
cool.
3.
Open the door, and remove the glass
cover by turning it counterclockwise.
4.
Remove the oven light from the socket
by turning it counterclockwise.
Insert a new 40-watt appliance bulb
5.
into the socket, and then turn it
clockwise to tighten.
6.
Reinsert the glass cover, and then turn
it clockwise to tighten.

Removing and Re-installing the Oven Door

How to remove the door
NOTE
You can remove the upper door the same way you remove the full door.
CAUTION
The door is very heavy. Be careful when removing and lifting the door. Do not
lift the door by the handle.
Turn the power OFF before removing the door.
Open the door completely.
1.
2.
Pull the hinge locks down toward the door frame to the unlocked position.
Locked position
Fig. 1
about 5°
Fig. 2
Hinge lock
Unlocked position
3.
Firmly grasp both sides of the door at
the top.
4.
Close the door to the door removal
position, which is approximately
5 degrees from vertical (Fig. 1).
5.
Lift the door up and out until the hinge
arm is clear of the slot (Fig. 2).
English 49

Publicité

Table des Matières
loading

Table des Matières