Samsung NY58J9850WS Manuel D'utilisation page 31

Masquer les pouces Voir aussi pour NY58J9850WS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Timed Cook (Lower oven mode)
3
3
5
1.
Insert the Smart divider into the cavity.
2.
Press the LOWER button.
3.
Press the button corresponding to a desired cooking mode such as
If necessary, change the temperature using the number pad.
4.
5.
Press the Cooking Time button.
6.
Set the cooking time between 1 minute and 9 hours and 99 minutes (9:99)
using the number pad.
7.
Press the START/SET button. The oven will automatically turn on and start
preheating. The temperature will increase until it reaches the temperature you
set.
8.
When preheating is complete, put the container with the food on a rack, and
then close the door. The oven starts cooking for the amount of time you set.
9.
When the cooking time has elapsed, the oven will automatically shut off and
then beep.
Delay Start (Single mode)
The Delay Start function lets you use the kitchen timer to automatically start
2
and stop another cooking program. You can set Delay Start so that it delays the
automatic start of a cooking operation you select by up to 12 hours.
7
Mode: Bake /
4
6
Bake.
1.
Place the container with the food on a rack, and then close the door.
2.
Press the button corresponding to a desired cooking mode such as
3.
If necessary, change the temperature using the number pad.
4.
Press the Cooking Time button.
5.
Set the cooking time between 1 minute and 9 hours and 99 minutes (9:99)
using the number pad.
6.
Press the Delay Start button to change the time elements (AM/PM).
7.
Set the starting time using the number pad.
8.
Press the START/SET button.
9.
The oven starts cooking at the set time, and turns off automatically when it
completes cooking.
NOTE
To change the starting time, press the Delay Start button, and enter a new
starting time. Then, press the START/SET button.
Bake /
Roast / Healthy Cook / Self-clean
2
2
6
4
8
3
5
7
Bake.
English 31

Publicité

Table des Matières
loading

Table des Matières