Operational Principles; Front Panel Layout - Aim TTi TGR2050 Serie Guide De Démarrage Rapide

5 - Operational Principles

Front Panel Layout

OPERATIONAL PRINCIPLES
Front Panel Layout
Ref. Description
1 Flash Drive
Touch Screen
2
display
3 Standby button
4 Parameter Keys
5 Numeric Keypad
6 RF Out
7 RF On Key
Escape / Local
8
Key
9 Directional Keys
10 Rotary Knob
8
Function
USB host connector for USB Flash Drive storage.
Do not use sharp or pointed objects to operate the touch screen.
Illuminated when in standby. Press and hold to turn instrument on, quick
press to turn off.
[Freq] (frequency) and [Amp] (amplitude)- select the requested parameter for
editing. These keys also return to the home screen.
Mode keys- [
Mod] (modulation) and [Sweep] - select the operating mode.
The selected key becomes illuminated when mode is activated/enabled. If
both mode keys are unlit the mode will be continuous carrier wave.
Menu keys - [
Stores] key allows access to files saved in the built-in storage
and to a connected flash drive.
[Utility] - Accesses menus for a variety of functions such as: Instrument and
System settings, Calibration, IQ Trim and more.
[Trigger]- Issues a manual trigger signal.
Enters numeric parameters directly.
RF output socket
Switches output on or off, illuminated when on.
Abandons entry at any point, also exits the selection or screen currently
selected. Also used to return to local control from remote control mode
Navigates parameter windows, adjusts numerical values and scrolls mode
selections. Applies step changes to frequency and amplitude.
Navigates the user interface, it features a 'press' function to select an option.
Do not apply an external voltage to this output.
TGR2050 Series Quick Start Guide