Electrical Requirements; Mains Operating Voltage; Mains Lead - Aim TTi TGR2050 Serie Guide De Démarrage Rapide

4 - Electrical Requirements

Mains operating voltage

ELECTRICAL REQUIREMENTS
Mains operating voltage
The instrument has a universal input range and will operate from a nominal 115V or 230V mains
supply without adjustment. Check that the local supply meets the AC input requirement given in
the Specification.

Mains lead

Connect the instrument to the AC supply using the mains lead provided.
Should a mains plug be required for a different mains outlet socket, a suitably rated and approved
mains lead set should be used which is fitted with the required wall plug and an IEC60320 C13
connector for the instrument end.
To determine the minimum current rating of the lead-set for the intended AC supply, refer to the
power rating information on the equipment or in the Specification.
WARNING
THIS INSTRUMENT MUST BE EARTHED.
Any interruption of the mains earth conductor inside or outside the instrument will make the
instrument dangerous. Intentional interruption is prohibited.
Before use, inspect provided mains lead for any signs of damage. Do not use if lead is damaged.
Before use, inspect the instrument for any signs of damage. Do not use if damaged.
7 TGR2050 Series Quick Start Guide