Rear Panel Layout - Aim TTi TGR2050 Serie Guide De Démarrage Rapide

5 - Operational Principles

Rear Panel Layout

Rear Panel Layout
Ref. Description
1 AC Power Inlet
Internal
2
Reference Out
External
3
Reference In
4 Sync Out
External
5
Trigger In
6 Mod In / Out
7 LAN
8 USB
9 GPIB (optional)
9
Function
Rated voltage: 100-240VAC ~ 50/60Hz, 50VA MAX
10MHz, >2Vpp into 50Ω
Do not apply an external voltage to this output.
10MHz, 2-5Vpp from 50Ω
Do not apply an external voltages exceeding 5Vpp.
Automatically selected to be either Modulation Sync or Sweep Sync.
Output impedance 50Ω nominal. Logic levels of <0.8V & >3V unloaded. SYNC
will withstand a short circuit to ground.
Do not apply an external voltage to this output.
DC coupled External Trigger Input signal, nominal threshold 1.65V
Do not apply an external voltages exceeding ±10V.
Analogue MOD IN, AC coupled 10kΩ input impedance, 1Vp-p full scale.
Analogue MOD OUT, DC coupled 150Ω source impedance, 2Vp-p full scale
unloaded. Digital MOD IN, DC coupled 10kΩ input impedance, nominal
threshold of +1.65V. Digital MOD OUT, DC coupled 150Ω source impedance,
logic levels of <0.8V & >3V unloaded.
Do not apply an external voltages exceeding ±10V.
Designed to meet 1.5 LXI Device Specification 2016.Remote control is
possible using the TCP/IP Socket protocol.
Accepts a standard USB cable.
IEEE-488 The default GPIB address is 11.
TGR2050 Series Quick Start Guide