Safety; Symbols - Aim TTi TGR2050 Serie Guide De Démarrage Rapide

2 - Safety

Symbols

SAFETY
Symbols
This instruction manual contains information and warnings which must be followed by the user to
ensure safe operation and to retain the instrument in a safe condition.
The following symbols are displayed on the instrument and throughout the manual, to ensure the
safety of the user and the instrument, all information must be read before proceeding.
WARNING
Indicates a hazard that, if not avoided, could result in injury or death.
CAUTION
Indicates a hazard that could damage the product that may result in loss of important data or
invalidation of the warranty.
NOTE
Indicates a helpful tip
E
4
Terminal connected to chassis ground.
Standby supply. Instrument is not disconnected from AC
mains power when switch is off.
Alternating current.
TGR2050 Series Quick Start Guide