Cleaning The Click-On Attachments; Travel Lock - Philips Wet and dry Shaver S7000 Mode D'emploi

22
English

Cleaning the click-on attachments

Cleaning the precision trimmer attachment

Travel lock

Activating the travel lock
3 sec.
11 Align the arrows on the retaining ring with the
projections in the shaving head holder. Turn the
ring clockwise until it clicks to indicate that the
ring is fixed.
12 Attach the shaving head holder to the bottom
part of the shaving unit ('click').
Clean the trimmer attachment after each use.
1 Switch on the appliance with the precision
trimmer attachment attached.
2 Rinse the attachment under a warm tap.
3 After cleaning, switch off the appliance.
4 Carefully shake off excess water and let the
attachment air-dry completely.
For optimal performance, lubricate the teeth of the
attachment with a drop of sewing machine oil
every six months.
You can lock the shaver when you are going to
travel to prevent it from switching on accidentally.
1 Press the on/off button for 3 seconds to use
the travel lock mode.
While you activate the travel lock, the travel lock
symbol lights up briefly. When the travel lock is
activated, the travel lock symbol flashes.
Note: When travel lock is activated, Bluetooth is
deactivated.