Using The Shaver - Philips Wet and dry Shaver S7000 Mode D'emploi

14
English
S7920
Unpair the shaver and smartphone

Using the shaver

2 Make sure Bluetooth on the smartphone is
switched on.
3 Switch on the shaver.
4 Open the app and follow the instructions to
start the pairing process.
5 When paired, the shaver and app will connect
automatically when you open the app. Simply
keep the app open and Bluetooth on.
Pairing allows a connection between 1 shaver and 1
smartphone. To remove this connection (e.g. when
you have a new smartphone), use the following
steps:
1 Unpair the shaver: press and hold the on/off
button on the handle for approx. 10 seconds to
remove the bond between shaver and app.
Note: The unpairing of the shaver is successful
when the notification symbol lights up 4 times
briefly.
2 Unpair your smartphone: go to 'Settings' on
your smartphone and select Bluetooth. Then
select ' Shaver S79xx' and press 'forget' or
'unpair'.
Note: The unpairing procedure may vary per
smartphone. Please check your smartphone
manual for more information.
Always check the shaver and all accessories
before use. Do not use the shaver or any
accessory if it is damaged, as this may cause