Cleaning And Maintenance; Cleaning The Shaver Under The Tap - Philips Wet and dry Shaver S7000 Mode D'emploi

Cleaning and maintenance

Cleaning the shaver under the tap

Regular cleaning guarantees better shaving
results.
Never clean, remove or replace the shaving
unit while the shaver is switched on.
Do not apply pressure to shaving head guards.
Do not touch shaving heads with hard objects
as this may dent or damage the precision-
made slotted guards.
Do not use compressed air, abrasives, scourers
or aggressive liquids such as petrol or acetone
to clean the shaver.
Clean the shaver after every shave for optimal
shaving performance.
Always check if the water is too hot, to prevent
burning your hands.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
While rinsing the shaving unit, water may drip out
of the bottom of the shaver. This is a normal
occurrence. The electronics are secured in a
watertight inner body.
1 Switch on the shaver.
2 Rinse the shaving unit with warm water.
19
English