Using The Click-On Attachment - Philips Sw6700 Mode D'emploi

Using the click-on attachment

Removing or attaching the click-on attachment
Note: Make sure that you rinse all foam or shaving
gel off the shaver.
Shaving with Turbo+ setting
1 Switch on the shaver.
2 Press the Turbo+ button once if you want to
shave areas with dense hair more quickly.
Note: The Turbo+ button flashes irregularly to
indicate that Turbo+ setting is activated.
3 Move the shaving heads over your skin in
circular movements to catch all hairs growing in
different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.
Note: Circular movements provide better
shaving results than straight movements.
4 Turn off the Turbo+ mode by pressing the
Turbo+ button once.
1 Make sure the shaver is switched off.
2 Pull the attachment straight off the shaver.
Note: Do not twist the attachment while you
pull it off the shaver.
17
English