Care Of Your Waterpik® Sensonic® Professional Toothbrush; Battery Disposal; Important Precautions - Waterpik Sensonic SR 1000 E Mode D'emploi

10
CARE OF YOUR WATERPIK® SENSONIC® PROFESSIONAL TOOTHBRUSH
1. After each use, turn off unit, remove the brush
head from the handle and rinse brush head
under water.
2. Wipe the handle dry after each use.
3. Periodically, clean the charger base by
unplugging the unit and wiping with a damp cloth.
Service
There is no required routine service maintenance
and this product cannot be repaired.
For all your warranty and accessory needs,
please visit www.waterpik.com, click on "Product
Support" and the "Service" link for your nearest
Authorized Service Center. Shipment of product
directly to Waterpik offices may delay service.
When outside of the United States: Contact your
local dealer or write Water Pik, Inc. for the address
of the nearest authorized service center.

Battery Disposal

The power handle contains a Nickel Metal
Hydride battery, which does not contain heavy
metal and is environmentally friendly. The battery
is not replaceable. At the end of the battery life,
please recycle the power handle at your nearest
recycling center.

Important Precautions

Using Arm & Hammer PeroxiCare
®
abrasive or chemical cleaners may damage the
plastic housing of this product. Use of these
products voids this product warranty.
toothpaste,
®