Siemens SIPART PS2 Notice De Service page 39

● Air exhaust valve (depressurize drive)
2 bar (29 psi)
4 bar (58 psi)
6 bar (87 psi)
Valve leakage
Throttle ratio
Auxiliary power consumption in the controlled state
When using device version Ex d (6DR5..5-...), values are reduced by approximately 20%.
1)
Constructional design
How does it work?
● Range of stroke (linear actuator)
● Angle of rotation (part-turn actuator)
Mounting method
● On the linear actuator
● On the part-turn actuator
Material
● Enclosure
6DR5**0-*** (Macrolon)
6DR5**1-*** (Aluminum)
6DR5**2-*** (stainless steel)
6DR5**5-*** (Aluminum, pressure resistant)
● Pressure gauge block
Weight, basic device
● Glass-fiber reinforced polycarbonate housing
● Aluminum enclosure
● Stainless steel enclosure
● Flameproof aluminum enclosure
Versions
● In macrolon enclosure
● In the aluminum enclosure
● In flameproof aluminum enclosure
● In the stainless steel enclosure
Manometer
● Degree of protection
Manometer made of plastic
Manometer, steel
Manometer made of stainless steel 316
● Vibration resistance
SIPART PS2 (6DR5...)
A5E03436620-01, 03/2011
)
1
8.2 Nm³/h (36.1 USgpm)
13.7 Nm³/h (60.3 USgpm)
19.2 Nm³/h (84.5 USgpm)
< 6⋅10
Adjustable up to ∞: 1
< 3,6⋅10
3 ... 130 mm (0.12 ... 5.12") (angle of rotation of the
positioner axis 16 to 90°)
30 ... 100°
Using the mounting kit 6DR4004-8V and, if required, an
additional lever arm 6DR4004-8L on the actuators as per
IEC 60534-6-1 (NAMUR) with a fin, columns, or a plane
surface.
Using the mounting kit 6DR4004-8D on the actuators with
fastening plane as per VDI/VDE 3845 and IEC 60534-6-2:
The required mount must be provided on the actuator-
side.
Glass-fiber reinforced polycarbonate (PC)
GD AISi12
Austenitic stainless steel mat. no. 1.4581
GK AISi12
Aluminum AIMgSi, anodized
Approximately 0.9 kg (1.98 lb)
Approx. 1.3 kg (2.86 lb)
Approximately 3.9 kg (8.6 lb)
Approximately 5.2 kg (11.46 lb)
Single-acting and double-acting
Single-acting
Single-acting and double-acting
Single-acting and double-acting
IP31
IP44
IP54
In accordance with DIN EN 837-1
Nm³/h (0.0026 USgpm)
-4
Nm³/h (0.158 USgpm)
-2
39