Intended Use; Scope Of Delivery - Invacare Revato H335 Manuel D'utilisation

3.2 Intended Use

Invacare Revato grab bars are intended to be used as transfer
and support aid.
Intended users are any adults and adolescents with restricted
or limited mobility (e.g. legs and/or hips) or limited muscle
strength. If used without an assistant, the user must be able
to keep their own balance.
Indications
• Restricted or limited mobility (e.g. legs and/or hips) or
• having balance issues to stand up or walk due to
transitional or permanent disabilities.
Contraindications
There are no contraindications known when using the
product as intended.
For the maximum user weight of the product refer to
Technical Data.

3.3 Scope of Delivery

Not all products, models or accessories may be
available in every country.
Overview — Complete Products
H335
Support folding handle (700 mm)
R7762 Support folding handle (500 – 1000 mm)
R7765
Support folding handle with paper holder
(500 – 1000 mm)
R7770
Support folding handle with arm pad and
paper holder (500 – 1000 mm)
H345
Support folding handle with support leg (700
mm)
R7772
Support folding handle with support leg (600
– 1000 mm)
R7773 Support folding handle with support leg and
paper holder (600 – 1000 mm)
R7780 Support folding handle with support leg,
armpad and paper holder (600 – 1000 mm)
Overview — Accessories
R7763 Floor mounted console
R7764
Support leg (600 – 1000 mm)
R7765–W Toilet paper holder
R7766
Armpad
R7767
Aesthetic cover
R7768
Height adjustment plate set (0°, 2°, 4°)
R7769
Support leg with toilet paper holder (600 –
1000 mm)
The following items are included in the scope of delivery
depending on the product combination resp. accessory
ordered:
Support Folding Handle (Fig. 1)
Pos
Designation
Support bar
A
Guard
B
Wall attachment
C
socket (pre-mounted
to bracket)
1572997-E
Quantity
1
1
1
Pos Designation
Adjustment plate 2°
D
Adjustment plate 0°
E
F Adjustment plate 4°
Support Leg (Fig. 2)
Pos. Designation
Set of screw and nut
A
Hinge piece
B
End cap
C
D Support bar
Socket
E
Wall hinge
F
Fixing screw
G
Starlock retainer ring
H
Support leg
I
Guide
J
Protective cap
K
Foot assembly
L
R7763 – Floor Mounted Console (Fig. 3)
Pos.
Designation
Upright
A
Attachment plate
B
Clamp
C
Nut, DIN 934, M8
D
E
Washer, DIN 125, Ø 8,4 x Ø 16
Plate, pre-mounted to upright A 1
F
Toilet Paper Holder (Fig. 4)
Pos.
Designation
Roll holder
A
Hinge piece
B
Protective cap
C
Screw, DIN 912, M5 x 25
D
Nut, DIN 934, M5
E
Protective cap
F
G
Spacer Ø 8,2 x Ø 12 x 10
H Fastener, Ø 8
R7766 – Armpad (Fig. 5)
Pos. Designation
Armpad, PUR
A
Glue
B
Quantity
1
optional (included in
R7768)
optional (included in
R7768)
Quantity
2
1
1
1
1
1
1
1
1
1
4
1
Quantity
1
1
2
4
4
Quantity
1
1
1
1
1
2
1
1
Quantity
1
1
5