More Modes; Control Lock - Bauknecht BIK9 PPH8TS2 PT CH Guide Rapide

1
1,7 Liters
Once the descaling solution is poured inside the drawer, press
to start the main descaling process. The descaling phases
do not need you to stay in front of the appliance. After each
phase is completed, an acoustical feedback will be played and
the display will show instructions to proceed with the next
phase.
» PHASE 3: DRAINING (up to 3 min.)
When the display will show < PLACE A CONTAINER UNDER
NOZZLE >, please proceed with the draining task as described in
the dedicated Drain paragraph.
» PHASE 4: RINSING (~20 min.)
To clean the tank and the steam circuit, rinse cycle has to be
done. When the display shows <ADD WATER TO RINSE>, please
pour drinking water in the drawer, until the display shows "TANK
FULL", then press to start the first rinsing.
PHASE 5: DRAINING (up to 3 min.)
»
» PHASE 6: RINSING (~20 min.)
» PHASE 7: DRAINING (up to 3 min.)
PHASE 8: RINSING (~20 min.)
»
PHASE 9: DRAINING (up to 3 min.)
»
After the last draining operation press OK to complete the
descale. When Descale procedure is completed, it will be
possible to use all the steam functions.
*WPRO descaler is the suggested professional product for the
maintenance of the best performance of your steam function in the
oven. Please follow the instructions for use on the packaging. For
orders and information contact the after sales service or www.
bauknecht.eu
Bauknecht will not be held responsible for any damage caused by
the use of other cleaning products available on the market
MUTE
Tap the icon to mute or unmute all the sounds and
alarms.

CONTROL LOCK

The "Control Lock" enables you to lock the buttons on
the touch pad so they cannot be pressed accidently.
To activate the lock:
• Tap the icon.
To deactivate the lock:
• Tap the display.
• Swipe up on the message shown.
8
= 75 g
+ 2 + 3

MORE MODES

For selecting Sabbath mode and accessing Power
Management.
PREFERENCES
For changing several oven settings.
WI-FI
For changing settings or configuring a new home network.
INFO
For switching off "Store Demo Mode", resetting the
product and obtaining further information about the
product.