Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch Professional GBS 75 AE Notice Originale

OBJ_BUCH-459-005.book Page 14 Monday, December 2, 2013 8:07 AM
14 | English
Apply the machine to the workpiece only when switched on.
Work with moderate feed and carry out the sanding with par-
allel and overlapping strokes. Sand in the direction of the
grain; sanding across the grain produces an uneven sanding
effect.
Particularly when sanding coats of varnish, sand in the direc-
tion of the grain as the varnish could melt and smear the sur-
face of the workpiece and the sanding belt. Therefore, work
with dust extraction.
A sanding belt used for sanding metal should not be used for
other materials.
Use only original Bosch sanding accessories.
Store sanding belts only hanging; avoid creasing, as this
makes the belts unusable.
The sanding frame (accessory) allows for uniform and con-
trollable removal capacity when surface grinding larger wood-
en surfaces.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the machine itself, pull the mains
plug.
 For safe and proper working, always keep the machine
and ventilation slots clean.
Remove adherent sanding dust with a brush.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Cleaning the Dust Passage (see figure B)
From time to time, remove the protection cover 11 and clean
the dust passage 12 so that the suction capacity remains at an
optimum level.
Changing the Graphit Plate (Accessory) (see figure C)
The graphite plate 13 (accessory) is screwed onto the guide
plate 14 and enables an optimum sanding pattern.
The graphite plate 13 is subject to wear, depending on the in-
tensity of usage. To change the graphite plate 13, remove the
sanding belt 2. Unscrew the graphite plate 13 and replace it.
After mounting the sanding belt, adjust the belt run as de-
scribed in section "Changing the Sanding Belt" on page 13.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
2 609 932 906 | (2.12.13)
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Power Tools