Attaching The Ice Cream Maker For Bowl-Lift Mixers - KitchenAid KICA0WH Instructions

ASSEMBLING THE ICE CREAM MAKER CMD + SHIFT CLICK TO CHANGE COPY
Attaching the dr_ive assembly for_ Tilt-Head Mixer_s
Attaching the Ice Cr_eam Maker_ for_ Bowl-Lift Mixer_s
Befor_e Fir_st Use
Before using your attachment, remove the "Do not immerse in water" label. The drive
assembly and dasher are dishwasher safe. The bowl must be washed by hand.
Turn Stand Mixer OFF and unplug.
1
IMPORTANT: Do not pour ice cream batter into the freeze bowl until all parts
are assembled and the mixer is running.
NOTE: Use the freeze bowl immediately upon removal from freezer, as it begins
to thaw once removed.
8
Plug the mixer into a grounded 3-prong
7
outlet.
Place bowl-lift handle in down position
2
and remove mixing bowl.