Klein Tools True RMS CL600 Manuel D'instructions page 9

AC CURRENT (LESS THAN 600A)
AC Current is measured by pressing the clamp trigger
the clamp and placing it around a current-carrying wire. When
3
measuring, care should be taken to ensure that the clamp
completely closed with trigger
passes perpendicularly through the center of the clamp
with the arrow markings
To measure current:
1. Rotate the Function Selector switch
2. Place clamp
shown in the display. The meter will auto-range to display the
measurement in the most appropriate range.
Disconnect test leads when measuring with the clamp.
OPERATING INSTRUCTIONS
.
11
around wire. The current measurement will be
3
fully released, and that the wire
10
to the AC current A
2
to open
10
is
3
in line
3
setting.
9