Operating Guide; Performance Control Settings; Thermal Roll-Back; C.joystick Stationary - Quickie Pulse 6 BC Mode D'emploi

E N G L I S H
A. PERFORMANCE CONTROL SETTINGS
NOTE– Seek advice regarding checking and adjusting settings.
1. It is vital to match control settings to your level of function and ability.
2. Consult your health care professional and your supplier to select the best control set-
tings for you.
3. Check and adjust the settings every six to twelve months.
Adjust the control settings immediately if you notice any change in your ability
to:
• Control the joystick.
• Avoid running into objects.
4. Control Settings can be adjusted by your dealer.
B. THERMAL ROLL-BACK
Your chair has a thermal roll back circuit. This protects the controller from damage due to
overheating. In extreme conditions (such as repetitive hill climbing) the circuit will decrease the
power to your motors. This allows the chair to operate at a reduced speed. When the con-
troller cools, the chair will return to normal speed.
C. JOYSTICK STATIONARY
Your chair has an available programming feature called "Joystick Stationary" which can be set
by your dealer. This feature senses when the joystick is displaced from neutral, yet left in a
steady position for a predetermined period of time. The controller will automatically turn off
if the set time has been reached. This feature is designed to protect the user, batteries and
electronics if the joystick is inadvertently displaced. There are two parameters that can be
adjusted:
1. Joystick Stationary Time:
This is the time the joystick has to remain within the stationary range before the unit
will come to a stop. It can be programmed from 0 to 60 minutes in steps of one
minute. Select 0 to disable the function. Default setting is 0 (Disabled).
2. Joystick Stationary Range:
This determines the size of a region around the present joystick position. If the joystick
remains within this region for the stationary time the controller will stop. The range
can be programmed from 1 to 50, in steps of 1. Default setting is 1.
Before turning on or adjusting these parameters, carefully read and understand
the implications for use of these features, Joystick Stationary Time and Joystick
Stationary Range. When the "Joystick Stationary Time" is reached within the
"Joystick Stationary Range", the drive motors on the chair will shut off. As an
example, this will happen while driving in a straight line for extended periods of
time with no joystick movement. Once the drive motors turn off, the user will
need to turn the chair off and back on to drive.
119832 Rev. A
IX. OPERATING GUIDE
WARNING
WARNING
20
I X . O P E R AT I N G G U I D E