U-Bolt Fastenings; Fasten Bicycles On The Drawbar Carrier; Required Parts - LAS 11807 Manuel De L'opérateur

U BOLT FASTENINGS
Mount the U-bolt as follows: The protective rubbers are already fi xed on the
U-bolt. Place the lock washers at an angle of 90° to each other on the outside
of the interior distance tube as shown on the detailed view. Insert the U-bolt
and put the carrier bolts M6 x 100 at fi rst through the U-bolt, then through
the lock washer and fi nally through the distance tube. Secure the U-bolt
with the 6mm washers and with the M6 plastic knurled nuts. If necessary,
the U-bolt can be moved slightly after removal of bicycles in order to open
the bottle case of your caravan. See picture below.
Picture 3

REQUIRED PARTS

Fastening straps and Safety straps
Drawbar fastening
Plastic bloc
8
Locking screws
MOUNTING
With the aid of the drawbar attachments supplied, attach the drawbar
carrier to the drawbar of your caravan. The plastic blocks are positioned
under the drawbar carrier on the caravan drawbar, so that the U-clamp of
the drawbar carrier can move freely and does not come into contact. The
attachment clamps are fi tted around the profi le of the drawbar from below,
and secured to the drawbar attachment with the pipe clamps, washers and
nuts. After attachment to the drawbar, you can bolt the holders fi rmly to
your drawbar carrier using the 4 mm locking bolts supplied.
CAUTION
The steering lock must not be impeded.

FASTEN BICYCLES ON THE DRAWBAR CARRIER

Put the fi rst bicycle in the fi rst wheel rail (closest to the vehicle) and fasten
on U-bolt with the short fastening straps.
Fasten the wheels with the 3 small fastening straps. Please take care, that
2 fastening straps are foreseen for the steerable wheel and one fastening
strap is for the fi xed wheel. Usually the second bicycle is placed opposed
into the second rail and also fastened on the U-bolt with the short fastening
straps. Fasten the wheels as described for bicycle one.
It might be necessary to adjust the bicycles individually on the drawbar
carrier other then described in order to fasten the bicycles correctly. Now
secure the bicycles with the long safety strap. Pull the safety strap through
the bicycle frames and around the U-bolt and fasten the safety strap tightly.
CAUTION
Feed the safety strap through the bicycle frames and around
the U-clamp, and then tighten the safety strap fi rmly.
Safety strap
Wheel attachments