Troubleshooting - Klarstein DELICATESSA Mode D'emploi

EN
74

TROUBLESHOOTING

Problem
The cooktop cannot be
turned on.
The touch controls are
unresponsive.
The touch controls are
difficult to operate.
The glass is being
scratched.
Some pans make crack-
ling or clicking noises.
The induction hob makes
a low humming noise
when used on a high heat
setting.
Fan noise coming from the
induction hob.
Possible causes
No power.
The controls are locked.
There may be a slight film
of water over the controls
or you may be using the
tip of your finger when
touching the controls.
Rough-edged cookware.
Unsuitable, abrasive
scourer or cleaning prod-
ucts being used.
This may be caused by
the construction of your
cookware (layers of
different metals vibrating
differently).
This is caused by the
technology of induction
cooking.
A cooling fan built into
your induction hob has
come on to prevent
the electronics from
overheating. It may
continue to run even
after you've turned the
induction hob off.
Possible solutions
Make sure the cook-
top is connected to the
power supply and that
it is switched on. Check
whether there is a power
outage in your home or
area. If you've checked
everything and the
problem persists, call a
qualified technician.
Unlock the controls.
Make sure the touch con-
trol area is dry and use the
ball of your finger when
touching the controls.
Use cookware with flat
and smooth bases. See
"Choosing the right cook-
ware". See "Care and
cleaning".
This is normal for
cookware and does not
indicate a fault.
This is normal, but the
noise should quieten down
or disappear completely
when you decrease the
heat setting.
This is normal and
requires no action. Do not
disconnect the device from
the power supply while
the device's fan is still
running.