Klarstein DELICATESSA Mode D'emploi page 60

EN
60
Touching the heating zone selection control, and a
indicator next to the key will flash
Adjust the power by either touching the "-" or "+" or by running your finger along the
temperature slider or touching anywhere on it.
• If you do not select a temperature setting within one minute, the induction hob
will switch off automatically. You must then switch the device on again and start
from step 1.
• You can change the temperature setting at any time during the cooking process.
• If you move your finger along the temperature slider, the power varies from
stage 1 to stage 9.
If the display flashes
• you have not placed a pan on the correct cooking zone or,
• the pan you are using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone. The display
will automatically turn off after 1 minute if no suitable pan is placed on it.
alternately with the heat setting: