RIB King Mode D'emploi page 27

follows from page 31
E
XPANDER CARD FOR KS2
!! FEED THE EXP CARD IN WHEN POWER IS NOT SUPPLIED !!
- PEDESTRIAN OPENING COMMAND
- AUTOMATIC PEDESTRIAN CLOSING
- MANAGEMENT OF THE SAFETY EDGE
- 24VAC ACCESSORIES FEEDING
- MANAGEMENT OF THE TRAFFIC LIGHT CONTR
- MANAGEMENT OF THE COURTESY LIGHT
- CLOSING COMMAND AFTER PASSING THROUGH THE
PHOTOCELLS*
E
XPANDER PLEX CARD FOR KS2
LIKE EXPANDER BOARD, BUT IN ADDITION WITH:
- AUTOTEST OF 4 PHOTOCELLS
- AUTOTEST STRIPS
*NOT FOR EXPANDER PLEX
S
HIELDED WIRE FOR KS2
It is compulsory to use shielded cable for the encoder in order to
guarantee the correct operation of the control board.
The screen of the ENCODER cable must be earth grounded at one
end (not to the card GND), and at the opposite end the screen must
be free (conductor not connected).
R
ADIO TRANSMITTER MOON
D5
433 code ACG6081 433 code ACG6082
91 code ACG7025 91
D4
D3
C
D2
ODE LEARNIG SYSTEM RADIORECEIVERS
code ACG5470
RX91/A
RX91/A
RX433/A
RX433/A
RX433/A 2CH super eterodyne, 2 channel and coupling code ACG5051
RX433/A 2CH super eterodyne, 2 channel and terminal board
B
LOCK
code ACG5472
KEY SELECTOR FOR WALL-INSTALLATION
KEY SELECTOR TO BUILD-IN
P
USH-BUTTON FLAT
Connection to motor
Connection to control panel
code ACG2133
MOON 433 - MOON 91
code ACG7026
quarzata and coupling
quarzata and terminal board
super eterodyne and coupling
super eterodyne and terminal board
G G
B B
MOON CLONE
code ACG6093
code ACG5005
code ACG5004
code ACG5055
code ACG5056
code ACG5052
code ACG1053
code ACG1048
code ACG2012
code ACG2013