Preparations; Positioning Curved Knives - Kramp MS100 Manuel D'utilisation

Knife sharpener MS 100
Operation
6.3

Preparations

Pos : 7.9 /KN2006- SM/nL.......... Seitenumbr uc h .......... @ 8\mod_1141998334703_0.doc @ 75489
6.3.1 Startup
1. Place the machine on a stable and level surface.
2. Attach the power plug.
Plug the power plug into the designated socket.
3. Check the cup grinding wheel.
6.4

Positioning curved knives

Pos : 7.18 /KN 2006-SM /Bedi enung/007 1.1 Stillsetzen i m N otfall --> Anl age und grösser e M asc hine @ 9\mod_1144432835796_1.doc @ 86788
In dangerous situations, the movements of the machine must be stopped and the power supply cut off as
quickly as possible. Also make sure that the curved knife is securely clamped into the clamping device and
rests safely against the end stop bolts.
20
WARNING!
Risk of injury due to incorrect setup!
Setting the machine up improperly may lead to serious injuries.
Therefore:
–
Make sure there is sufficient room to operate the machine.
WARNING!
Risk of electric shock when handling cables improperly!
WARNING!
Always check the cup grinding wheel before starting up the machine!
1. The curved knife must be
securely placed in the
center of the adjusting
plate. Smooth cutting
surface at the top,
serrated edge at the
bottom.
3. Position the end stop
bolts as far out as
possible and fix them in
place.
2. The cutting surface must
protrude by approx. 0.79
in from the adjusting
plate.
4. Position the clamping
device in such a way that
the knife holder securely
clamps the curved knife
you want to sharpen
(approx. half of the
overlap)
03/2015