Safeguard Against Restart; Behavior In The Event Of Danger Or Accidents - Kramp MS100 Manuel D'utilisation

Knife sharpener MS 100
Safety

2.7 Safeguard against restart

Power is supplied to the machine only via a mains connection and a (country-specific) plug.
Equipped either with 400V or 230V electric motor
Safeguard against restart:
1.
2.
2.8

Behavior in the event of danger or accidents

Preventive

measures



10
WARNING!
Risk of fatal injury caused by uncontrolled restart!
Uncontrolled restart may cause serious personal injury or death!
Therefore:
–
Before turning the machine back on, make sure that the cause that triggered the
emergency stop has been removed and all safety fixtures are installed and
function properly.
–
Do not release the emergency stop button until there is no more danger.
DANGER!
Risk of fatal injury caused by unauthorized restart!
Work in the hazard area of the machine always involves the risk of the power supply being
switched on without authority. This may cause fatal injuries to any person inside the hazard
area of the machine.
Therefore:
–
Follow the information on safeguarding against restart provided in the chapters of these
instructions.
–
Follow the procedure applied to safeguard the machine against unauthorized restart as
described below.
Press the emergency stop button until it locks into place.
do not continue to work until this condition has been set
Always be prepared for accidents or fire!
Keep first aid equipment (first aid kit, blankets, etc.) and fire extinguishers readily available.
Familiarize your personnel with all accident signaling, first aid and rescue equipment.
Keep access roads clear for rescue vehicles.
Safety switch (Emergency Stop)
The safety switch is located at the front on the electric motor.
03/2015