Function Buttons; Backlight - Klein Tools CL700 Manuel D'instructions

ON/OFF
To power ON the meter, rotate the Function Selector switch
the OFF setting to any measurement setting. To power OFF the meter,
rotate the Function Selector switch
the meter will automatically power OFF after 30 minutes of inactivity.
If the meter automatically powers OFF while in a measurement
setting, rotate Function Selector switch
(excluding the OFF setting) to power ON the meter. To deactivate
the power OFF functionality press and hold the "SEL" button
before powering ON from the OFF setting. When auto power OFF
is deactivated, the Auto Power Off icon
display.
"SEL" (SELECT) BUTTON (FOR SECONDARY FUNCTIONS)
The "SEL" button
application accessible by the function selector switch
voltage and low impedance it toggles between AC and DC, for the
other functions it switches between °F and °C, between Hz and %
Duty-Cycle, and between Continuity, Resistance, and Diode-Test. The
default function for each application is printed on the meter in white;
the secondary function or functions for each setting is printed on the
meter in orange.
DATA HOLD
Press the Data Hold / Backlight button
on the display. Press again to release the display to return to live
measuring.

BACKLIGHT

Press and hold the Data Hold / Backlight button
one second to turn ON the backlight. The backlight will automatically
power OFF after 3 minutes of inactivity.
RANGE
The meter defaults to auto-ranging mode
automatically determines the most appropriate measurement range
for the testing that is being conducted. To manually force the meter to
measure in a different range, use the Range button
1. Press the "RANGE" button
range (
"RANGE" button
once the desired range is reached.
2. To return to auto-ranging mode, press and hold the "RANGE"
button for more than one second (
7

FUNCTION BUTTONS

activates the secondary function for each
9
is deactivated on the LCD). Repeatedly press the
to cycle through the available ranges, stopping
7
to the OFF setting. By default,
2
to any other setting
2
will not be visible in the
to hold the measurement
6
to manually select measurement
7
2
. For
2
for more than
6
. This mode
.
7
is reactivated).
from
9
7