Diodetest - Klein Tools CL700 Manuel D'instructions

DIODE TEST
1. Insert RED test lead into V jack
COM jack
4
Continuity/Resistance/Diode-Test
NOTE: The meter defaults to Continuity testing in this mode. Press
the "SEL" button
icon will appear on the display.
2. Touch test leads to diode. A reading of 200-800mV on display
indicates forward bias, "OL" indicates reverse bias. An open
device will show "OL" in both polarities. A shorted device will
show approximately 0mV.
Black lead Red lead
FREQUENCY / DUTY-CYCLE
1. Insert RED test lead into V jack
COM jack
Frequency/Duty-Cycle
NOTE: The meter defaults to Frequency testing in this mode. To enter
Duty-Cycle testing mode, press the "SEL" button
that the appropriate icon (either Hz or % ) appears on the display.
2. Measure by connecting test leads across the circuit.
Black lead Red lead
CAPACITANCE
1. Insert RED test lead into V jack
COM jack
4
Capacitance
OPERATING INSTRUCTIONS
, and rotate function selector switch
twice to enter Diode testing mode. The Diode
9
, and rotate function selector switch
4
, and rotate function selector switch
setting.
, and BLACK test lead into
5
setting.
and BLACK test lead into
5
setting.
, and BLACK test lead into
5
to the
2
to the
2
once. Ensure
9
to the
2
13