Bialetti Easy Timer Mode D'emploi page 14

EN EN
INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE
Coffee Maker Coffee Maker
FILLING/PREPARATION PROCEDURE FILLING/PREPARATION PROCEDURE
• Unscrew the collection unit. • Unscrew the collection unit.
• Extract the funnel from the neater unit. • Extract the funnel from the neater unit.
• Pour the water into the heater unit paying attention not to exceed the safety valve outlet. • Pour the water into the heater unit paying attention not to exceed the safety valve outlet.
• Insert the funnel into the heater unit. • Insert the funnel into the heater unit.
• Add the coffee as usual. • Add the coffee as usual.
• Screw back the collection unit and place the coffee maker on its power base. • Screw back the collection unit and place the coffee maker on its power base.
Base Timer: Turn on the base manually or by using the timer. Base Timer: Turn on the base manually or by using the timer.
Base No Timer: Press the ON button to switch on the base. Base No Timer: Press the ON button to switch on the base.
INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE
• When the coffee is ready an acoustic warning signal is activated. • When the coffee is ready an acoustic warning signal is activated.
• The coffee remains hot for 20 minutes from when the signal is activated. • The coffee remains hot for 20 minutes from when the signal is activated.
• To serve the coffee, lift the coffee maker off the base and pour its content into the coffee cups. • To serve the coffee, lift the coffee maker off the base and pour its content into the coffee cups.
Timer Base Timer Base
IMPORTANT IMPORTANT
Before start using the coffee maker, reset the timer: plug in the electrical base to an electri- Before start using the coffee maker, reset the timer: plug in the electrical base to an electri-
cal socket and press at the same time "s", "+" and "-" button. cal socket and press at the same time "s", "+" and "-" button.
When plugging in the electrical base, if the red led is lighting, reset the base, pressing at the When plugging in the electrical base, if the red led is lighting, reset the base, pressing at the
same time "s", "+", "-". same time "s", "+", "-".
In order to protect the electrical base, the base has to be charged for at least 8 hours, before In order to protect the electrical base, the base has to be charged for at least 8 hours, before
start using it. start using it.
• The power base must be plugged into the main power supply. • The power base must be plugged into the main power supply.
• When the plug is removed, the electronic system is powered for a week self-recharging inter- • When the plug is removed, the electronic system is powered for a week self-recharging inter-
nal batteries, which have the sole function of maintaining all the set programmes in memory. nal batteries, which have the sole function of maintaining all the set programmes in memory.
• If the figures do not appear correctly on the display reset the system: reset the clock/timer by • If the figures do not appear correctly on the display reset the system: reset the clock/timer by
simultaneously pressing the three base Keys: "S", "+", "-" (with the device's plug in). simultaneously pressing the three base Keys: "S", "+", "-" (with the device's plug in).
INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE
Clock Functions Clock Functions
The first time the appliance is used, when it is plugged in, the clock functions are activated and The first time the appliance is used, when it is plugged in, the clock functions are activated and
"0:00" appears on the display. To set the correct time: "0:00" appears on the display. To set the correct time:
• Repeatedly press the "S" button, until the word TIME flashes on the bottom left of the di- • Repeatedly press the "S" button, until the word TIME flashes on the bottom left of the di-
splay. splay.
• Press the "+" or "-" buttons, until the correct time is set. • Press the "+" or "-" buttons, until the correct time is set.
It is possible to advance or retract quickly by keeping the "+" or "-" buttons pressed for a couple It is possible to advance or retract quickly by keeping the "+" or "-" buttons pressed for a couple
of seconds. of seconds.
Setting the Alarm Setting the Alarm
To set the time to prepare the beverage: To set the time to prepare the beverage:
• Repeatedly press the "S" button, until the word ALARM appears on the display. • Repeatedly press the "S" button, until the word ALARM appears on the display.
• Press the "+" or "-" buttons until the alarm time is set. • Press the "+" or "-" buttons until the alarm time is set.
It is possible to advance or retract quickly by keeping the "+" or "-" buttons pressed for a couple It is possible to advance or retract quickly by keeping the "+" or "-" buttons pressed for a couple
of seconds. of seconds.
14 14