Bialetti Easy Timer Mode D'emploi page 15

Preparing beverages in automatic mode (alarm) Preparing beverages in automatic mode (alarm)
• Activate the timer by pressing the "S" button and then the "+" button: a bell without a bar will • Activate the timer by pressing the "S" button and then the "+" button: a bell without a bar will
appear on the display. appear on the display.
• Prepare the coffee maker and place it on the base: it will start to work at the exact time that • Prepare the coffee maker and place it on the base: it will start to work at the exact time that
the alarm is set. An acoustic signal will advise the user when the coffee is ready. To deactivate the alarm is set. An acoustic signal will advise the user when the coffee is ready. To deactivate
the timer function: press the "S" button and then the"-" 6utton:a bell with a bar across will the timer function: press the "S" button and then the"-" 6utton:a bell with a bar across will
appear on the display. appear on the display.
PREPARING BEVERAGES IN MANUAL MODE PREPARING BEVERAGES IN MANUAL MODE
It is possible to use the base without it being programmed. It is possible to use the base without it being programmed.
• Prepare the coffee maker and place it on the base. • Prepare the coffee maker and place it on the base.
• Press the "+" (ON) button for at least 4 seconds: the indicator light will come on which signals • Press the "+" (ON) button for at least 4 seconds: the indicator light will come on which signals
that the preparation has commenced. Also in this case, an acoustic signal will advise the user that the preparation has commenced. Also in this case, an acoustic signal will advise the user
when the coffee is ready. when the coffee is ready.
ACOUSTIC SIGNALS ACOUSTIC SIGNALS
The acoustic signals remain active for about 1 minute. They may be interrupted by pressing The acoustic signals remain active for about 1 minute. They may be interrupted by pressing
any button: "S" or "+" or "-". The warning signals are as follows: any button: "S" or "+" or "-". The warning signals are as follows:
• Acoustic signal for "BEVERAGE READY" (continuous sequence of short signals). • Acoustic signal for "BEVERAGE READY" (continuous sequence of short signals).
• Acoustic signal for "ERROR" (continuous sequence of short signals) which warns if the power • Acoustic signal for "ERROR" (continuous sequence of short signals) which warns if the power
supply has failed or any errors made by the user have occurred, due to forgetfulness: supply has failed or any errors made by the user have occurred, due to forgetfulness:
-The coffee maker has not been placed on its base. -The coffee maker has not been placed on its base.
• A "DISCONNECTION" signal (continuous sequence of long signals). In all cases, after 12 mi- • A "DISCONNECTION" signal (continuous sequence of long signals). In all cases, after 12 mi-
nutes that the machine has been switched on, it automatically disconnects from the power nutes that the machine has been switched on, it automatically disconnects from the power
supply and the safety disconnection acoustic signal is activated. The user may switch off the supply and the safety disconnection acoustic signal is activated. The user may switch off the
coffee maker at any time by pressing the "-" OFF button. coffee maker at any time by pressing the "-" OFF button.
No Timer Base No Timer Base
IMPORTANT IMPORTANT
The power base must be connected to an electrical socket. The power base must be connected to an electrical socket.
INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE
• Insert the base plug into the socket. • Insert the base plug into the socket.
• Prepare the coffee maker and place it on the base. • Prepare the coffee maker and place it on the base.
• Press the ON switch for a minimum of 4 seconds - a green light indicates that your drink is • Press the ON switch for a minimum of 4 seconds - a green light indicates that your drink is
being prepared. An acoustic signal tells the user when the coffee is ready. being prepared. An acoustic signal tells the user when the coffee is ready.
ACOUSTIC SIGNALS ACOUSTIC SIGNALS
The acoustic signals are produced for approximately 1 minute. They can be interrupted by The acoustic signals are produced for approximately 1 minute. They can be interrupted by
pressing the ON switch. The acoustic signals are: pressing the ON switch. The acoustic signals are:
• "DRINK READY" signal (continuous sequence of short signals). • "DRINK READY" signal (continuous sequence of short signals).
• "ERROR" signal (continuous sequence of short signals) - to indicate the electricity supply has • "ERROR" signal (continuous sequence of short signals) - to indicate the electricity supply has
been cut off as well as user errors and oversights: been cut off as well as user errors and oversights:
- Failure to place the coffee maker on the base. - Failure to place the coffee maker on the base.
•"SHUTDOWN" signal (continuous sequence of long signals)-after 12 minutes the base cuts off •"SHUTDOWN" signal (continuous sequence of long signals)-after 12 minutes the base cuts off
the power supply for safety reasons and emits a warning signal. the power supply for safety reasons and emits a warning signal.
The user can interrupt the preparation of the drink at any time by removing the coffee maker The user can interrupt the preparation of the drink at any time by removing the coffee maker
from the base, unplugging the plug or pressing the "+" button. from the base, unplugging the plug or pressing the "+" button.
EN EN
349100943 349100943
15 15