Nice Road400 Mode D'emploi page 24

Manual movement and release: before carrying out this operation please note that release can only occur when
the leaf is stopped.
1 Slide the lock cover disc
To lock: carry out the same procedures backwards.
Control with safety devices out of order: If the safety devices are malfunctioning, it is still possible to control the
gate.
• Operate the gate control device (remote control or key-operated selector switch etc.). If the safety devices enable the
operation, the gate will open and close normally, otherwise the flashing light flashes a few times but the manoeuvre
does not start (the number of flashes depends on the reason why the manoeuvre is not enabled).
• In this case, actuate the control again within 3 seconds and keep it actuated.
• After approximately 2 s the gate will start moving in the "man present" mode, i.e. so long as the control is maintained
the door will keep moving; as soon as the control is released the door will stop.
If the safety devices are out of order the automation must be repaired as soon as possible.
Replace the Remote Control Battery: if your radio control after a period of time, seems not to work as well, or not
to work at all, it may simply be that the battery is flat (depending on the type of use, it may last from several months up
to one year and more). In this case you will see that the light confirming the transmission is weak, or does not come on,
or comes on only briefly. Before calling the installation technician try exchanging the battery with one from another oper-
ating transmitter: if the problem is caused by a low battery, just replace it with another of the same type.
Warning: The batteries contain polluting substances: do not dispose of them together with other waste but use the
methods established by local regulations.
Are you satisfied? If you wish to install another automation system in your home, call your old installation technician
and use Nice products. You will get the services of a specialist and the most advanced products available on the mar-
ket, superior performances and maximum system compatibility.
Thank you for reading these instructions. We feel confident that you will be well satisfied with your new system: for any
present of future requirements, please contact your reliable installation technician.
22
2 Insert and turn the key
clockwise
3 Pull the release handle 4 Move the leaf manually