Remote Control; Inserting The Batteries Into The Remote; Standby Button - Kimex 160-4065T Manuel D'utilisation

Remote Control

Inserting the Batteries into the Remote

Remove the screw that secures the battery
compartment cover on the back side of the remote
control first. Insert two 1.5V - size AAA batteries.
Make sure the (+) and (-) signs match (observe correct
polarity). Do not mix old and new batteries. Replace
only with same or equivalent type. Place the cover
back on. Then secure the cover again with the screw.
1. Standby: Quick Standby / Standby / On
2. Volume +/-: Increases or decreases the volume
3. Home: Opens the Home Screen
4. Menu: Displays the menu where available
5. Directional buttons: Navigates menus, setting
options, moves the focus or cursor, etc.
6. OK: Confirms user selections, enters to sub-men-
us
7. Back: Returns to previous screen, goes one step
back, closes open windows
8. Mute: Completely turns off the volume of the
Display
9. Freeze: Freezes the currently displayed image
on the screen. Press again to cancel the freeze
function. You can also press the Home, Back and
Exit buttons to quit freeze mode
10. Eye Care: Enables eye care function. Basically
the picture mode will be set to Vivid when this
button is pressed
11. Pause: Pauses the media being played
Play: Starts to play selected media
12. Numeric buttons: Opens a numeric keyboard.
Use this virtual keyboard to enter a number in the
text box on the screen
13. Picture Mode: Opens the picture mode selection
menu
14. Display Mode: Opens the aspect ratio selection
menu
15. Exit: Closes and exits from displayed menus or
any running application, returns to previous screen
16. Source: Shows all available content sources
17. Brightness +/-: Increases or decreases the
brightness of the screen

Standby Button

Press and hold the Standby button on the remote
control. Power off dialogue will appear on the screen.
Highlight OK and press the OK button. The Display will
switch into standby mode. Press briefly and release to
switch the Display into quick standby mode or to switch
on the Display when in quick standby or standby mode.
English - 11 -