Intended Use; Restrictions; Basic Safety Instructions - EBRO ARMATUREN EP 501 Démarrage Rapide

3

INTENDED USE

Incorrect use of the device can be dangerous to people,
nearby equipment and the environment.
The device is designed for the open-loop control and closed-loop
control of media.
▶ In the potentially explosion-risk area the device may be used only
according to the specification on the separate Ex type label. For
use observe the additional information enclosed with the device
together with safety instructions for the explosion-risk area.
▶ Devices without a separate Ex type label may not be used in a
potentially explosive area.
▶ The device must not be exposed to direct sunlight.
▶ Pulsating direct voltage (rectified alternating voltage without
smoothing) must not be used as operating voltage.
▶ During use observe the permitted data, the operating conditions
and conditions of use specified in the contract documents and
operating instructions, as described in chapter "„Description of
System" - „Technical Data" in this manual and in the valve manual
for the respective pneumatically actuated valve.
▶ The device may be used only in conjunction with third-party devices
and components recommended and authorised by Ebro.
▶ In view of the wide range of possible application cases, check
whether the device is suitable for the specific application case
and check this out if required.
▶ Correct transportation, correct storage and installation and care-
ful use and maintenance are essential for reliable and faultless
operation.
▶ Use the device only as intended.
3.1

Restrictions

If exporting the system/device, observe any existing restrictions.
6
english
Type EP 501
Intendeduse
4

BASIC SAFETY INSTRUCTIONS

These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations – the operator is responsible for observing
these regulations, also with reference to the installation personnel.
Danger – high pressure!
▶ Before loosening the pneumatic lines and valves, turn off the
pressure and vent the pneumatic lines.
Risk of electric shock!
▶ Before reaching into the device or the equipment, switch off the
operating voltage and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations
for electrical equipment!
Risk of burns/risk of fire if used continuously through hot
device surface!
▶ Keep the device away from highly flammable substances and
media and do not touch with bare hands.
General hazardous situations.
To prevent injury, ensure that:
▶ That the system cannot be activated unintentionally.
▶ The device may be operated only when in perfect condition and
in consideration of the operating instructions.
▶ Installation and repair work may be carried out by authorised
technicians only and with the appropriate tools.