Operating States; Changing The Operating State; Displays In Automatic Mode - EBRO ARMATUREN EP 501 Démarrage Rapide

9

OPERATING STATES

The device has 2 operating states:
AUTOMATIC and MANUAL.
AUTOMATIC
In the AUTOMATIC operating state normal
0.0
POS
controlled operation is implemented.
(The symbol for AUTOMATIC
shown on the display. A bar runs along
MENU CMD POS MANU the top of the display).
MANUAL
In the MANUAL operating state the
0.0
POS
valve can be manually opened or closed
via the arrow keys
OPN
MENU OPN CLS AUTO (The symbol for AUTOMATIC
hidden. No bar running along the top of
the display).
9.1

Changing the operating state

Change to MANUAL operating state
(only available for process value
display: POS, CMD, PV, SP)
Return to AUTOMATIC operating
state
14
(key function
and ).
CLS
press
MANU
press
AUTO
english
9.2

Displays in AUTOMATIC mode

Type EP 501
0.0
POS
MENU CMD MANU
CMD/POS
0.0
CMD
is
MENU POS TEMP MANU
0.0
TEMP
C

MENU CMD
CMD/POS
is
Type EP 501
Operatingstates
Description of the display
Actual position of the valve
actuator (0 – 100%)
Set-point position of the valve
actuator (0 – 100%)
Internal temperature in the
housing of the positioner ( °C)
Process actual value
Process set-point value
Simultaneous display of the
set-point position and the
actual position of the valve
actuator (0 – 100 %)
Type EP 501 C
0.0
POS
MENU SP/PV CMD MANU
0.0
CMD
MENU POS TEMP MANU
0.0
TEMP
C

MENU CMD PV
0.0
PV
m3/min
MENU TEMP SP MANU
0.0
SP
m3/min
MENU PV PV (t) INPUT
SP 0.0
m3/min
PV 0.0
m3/min
MENU POS MANU
CMD/POS