Function Of The Keys - EBRO ARMATUREN EP 501 Démarrage Rapide

Type EP 501
8.2

Function of the keys

The function of the 4 keys in the control field differs depending on
the operating state (AUTOMATIC or MANUAL) and operating level
(process level or setting level).
The key function which is active is displayed in the gray text field
which is above the key.
Key function on the process level:
Key Key function
Arrow key
OPN
(OPEN)
Arrow key
CLS
(CLOSE)
Selection key
MENU
Selection key
AUTO
MANUAL
Operation
Description of the Operating
function state
Manual opening of the
MANUAL
actuator
Change the displayed value
AUTOMATIC
(e.g. POS-CMD-TEMP-...)
Manual closing of the
MANUAL
actuator
Change the displayed value
AUTOMATIC
(e.g. POS-CMD-TEMP-...)
Change to the setting level
AUTOMATIC
Note: Press key for
or MANUAL
approx. 3 s.
Return to AUTOMATIC
MANUAL
operating state
Change to MANUAL oper-
AUTOMATIC
ating state
Key function on the setting level:
Key Key function
Arrow key
+
Arrow key
–
< –
Selection key
EXIT
(BACK)
ESC
STOP
Selection key
ENTER
SELEC
OK
INPUT
EXIT
(BACK)
RUN
STOP
Tab. 1: Function of the keys
english
Description of the function
Scroll up in the menus
Increase numerical values
Scroll down in the menus
Decrease numerical values
Change by one digit to the left; when
entering numerical values
Return to the process level
Gradually return from a submenu
option
Leave a menu
Stop a sequence
Select, activate or deactivate a menu
option
Gradually return from a submenu
option
Start a sequence
Stop a sequence
13