Pneumatic Data - EBRO ARMATUREN EP 501 Démarrage Rapide

Type EP 501
TechnicalData
Input data for set-point value signal
0/4 ... 20 mA: Input resistance
Resolution
0 ... 5/10 V: Input resistance
Resolution
Analogue feedback
max. current 10 mA
(for voltage output 0 ... 5/10 V)
0 ... 560 Ω
Burden (load)
(for voltage output 0/4 ... 20 mA)
Inductive proximity
switches 100 mA current limit
Binary outputs galvanically isolated
Current limiting 100 mA, output is clocked if overload
occurs
Binary input galvanically isolated
0 ... 5 V = log „0", 10 ... 30 V = log „1"
inverted input in reverse order
(input current < 6 mA)
7.7
180 Ω
Control medium
12 bit
19 kΩ
Dust content
12 bit
Water content
Oil content
Temperature range
of compressed air
Pressure range
Air flow rate
Connections
* Pressure specifications: Overpressure with respect to
atmospheric pressure

Pneumatic data

Quality classes in accordance with DIN ISO
8573-1
Class 5, max. particle size 40 µm,
max. particle density 10 mg/m³
Class 3, max. pressure dew point - 20 °C or
min. 10 degrees below the lowest operating
temperature
Class 5, max. 25 mg/m³
0 ... +60 °C
1.4 – 7 bar
95 l / min (at 1.4 bar*) for aeration and
N
deaeration
150 l / min (at 6 bar*) for aeration and
N
deaeration
(Q = 100 l / min (according to definition for
Nn N
pressure drop from 7 to 6 bar absolute)).
Internal thread G1/4"
english
11