Master Code - EBRO ARMATUREN EP 501 Démarrage Rapide

Type EP 501
Operatingstates
Type EP 501 Description of the display
Graphical display of SP and PV
with time axis
Graphical display of POS and
CMD with time axis
MENU CMD / POS (t) HOLD
4.0
Input signal for
INPUT
mA
set-point position
(0 – 5/10 V / 0/4 – 20 mA)
MENU CLOCK
CMD/POS
Time, weekday and date
CLOCK
12:00
00
Thu. 01 . 0 9 . 1 1
MENU INPUT
INPUT X.TUNE
Automatic adjustment of the
X.TUNE
positioner (position controller)
MENU RUN
CLOCK CMD/POS
Automatic optimization of the
process controller parameters
Type EP 501 C Type EP 501
MENU SP / PV (t) HOLD
CMD
POS
MENU CMD / POS (t) HOLD
MENU
X.TUNE
9.3
Operation of the device can be locked via a freely selectable user
code. In addition, there is a non-changeable master code with
CLOCK
12:00
00
which you can perform all operator control actions on the device.
This 4-digit master code can be found on the last pages of these
Thu. 01 . 0 9 . 1 1
operating instructions in the chapter "Master code".
MENU INPUT
POS (t) X.TUNE
If required, cut out the code and keep it separate from these oper-
X.TUNE
ating instructions.
MENU CLOCK P.TUNE RUN
P.TUNE
MENU X.TUNE P.LIN RUN
Description of the display
Automatic linearization of the
process characteristics
Simultaneous display of the
0.0
set-point position and the
0.0
actual position of the valve
actuator (0 – 100 %)
POS MANU

Master code

english
Type EP 501 C
P.LIN
MENU P.TUNE RUN
CMD/POS
CMD 0.0
POS 0.0
MENU P.LIN SP/PV MANU
15