Mitsubishi Electric PAR-SL101A-E Serie Manuel D'utilisation page 5

2. Names and functions of controller components
Controller interface
Set Temperature buttons
Mode button (Changes operation mode)
Airfl ow button (Changes up/
down airfl ow direction)
Timer ON button
Timer OFF button
Weekly timer ON/OFF button*
Set Time button (Sets the time)
Display
Operation mode
Cool Dry
Auto
Fan (single set
point)
Auto*
Heat (dual set
point)
* Refer to 5.4. in the installation
manual.
Temperature setting
The units of temperature
can be changed. For details,
refer to the Installation
Manual.
Vane setting
Step 1 Step 2 Step 3 Step 4 Step 5 Swing Auto
Transmission area
Remote controller display
OFF/ON button
Fan Speed button (Changes fan speed)
i-see button*
MENU button
SET/SEND button
CANCEL button
Up/Down buttons
Reset button
Note:
* This button is enabled or
disabled depending on the model
of the indoor unit.
Not available
Appears when a non-supported
function is selected.
Battery replacement indicator
Appears when the remaining bat-
tery power is low.
Fan speed setting The symbols differ depending
on models.
Auto
3D i-see sensor (Air distribution)
Default Direct Indirect
en
When Direct or In-
direct is selected,
the vane setting is
set to "Auto".
3