Mitsubishi Electric PAR-SL101A-E Serie Manuel D'utilisation page 15

4. Operation
<Enabling the weekly timer> (Fig. 4-3)
Point the transmission area of the wireless remote con-
troller towards the receiver on the indoor unit and oper-
ate the controller.
Press the button 0.
The weekly timer operates when
• The weekly timer does not function when the on/off timer
is enabled.
• The weekly timer operates when all of the on/off timer
settings have been executed.
4.7. i-See sensor (Fig. 4-3)
• This function cannot be operated depending on the model
of the indoor unit.
1. Each time button 1 is pressed during operation,
the setting changes in the following order: OFF → Direct
→ Indirect.
Display
Setting OFF
When the setting is changed from OFF to Direct or Indirect,
the vane setting changes to "Auto". This setting is applied
collectively to all of the vanes.
* Refer to the operation manual of the indoor unit for airfl ow
direction when direct / Indirect airfl ow is selected.
* G blinks twice when direct / Indirect airfl ow is not
selected.
2. The vanes automatically move relative to the areas where
persons are detected. When a person is detected, the
vanes operate as indicated in the following table.
Direct
Cooling
horizontal → swing
Heating
keep downward
H is on.
Direct Indirect
Vane setting
Indirect
keep horizontal
downward → horizontal
en
13