Technical Data; Noise/Vibration Information - Bosch GAS 20 L SFC Professional Notice Originale

(9) Castor
(10) Castor brake
(11) SFC switch
(12) Holder for dust extraction adapter
(13) Cable holder
(14) Holder for vacuum hose
(15) Holder for crevice nozzle/curved nozzle
(16) Holder for coarse dirt nozzle
(17) Vacuum hose
(18) Dust extraction adapter
(19) Curved nozzle
(20) Disposal bag
(21) Suction tube
(22) Coarse dirt nozzle
(23) Crevice nozzle
(24) Snap fastener
(25) Adapter for vacuum hose holder
(26) False air intake
(27) Filter holder
(28) Pleated filter
(29) Float

Technical data

Wet/dry dust extractor
Article number
Rated voltage
Rated power input
Frequency
Container volume (gross/net)
Net volume (liquid)
Dust bag volume
A)
Max. vacuum
– Dust extractor
– Turbine
A)
Max. volume flow rate
– Dust extractor
– Turbine
Max. suction power
Area of pleated filter
Dust class
Weight according to EPTA-Pro-
cedure 01:2014
Protection class
Bosch Power Tools
Wet/dry dust extractor
Protection rating
A) Measured using a vacuum hose 3 m long and 35 mm in diameter
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Automatic start/stop
EU
FR
UK
CH
DK
A)
Permitted connected load of the connected power tool
(country-specific)

Noise/Vibration Information

Noise emission values determined according to
EN 60335-2-69.
Typically the A-weighted sound pressure level of the dust ex-
tractor is 71 dB(A). Uncertainty K = 2 dB. The noise level
when working can exceed the volume stated. Wear hearing
protection!
Vibration total values a
determined according to EN 60335-2-69:
GAS 20 L SFC
a < 2.5 m/s
h
3 601 J7B 1..
Assembly
V 220–240
W 1200
Pull the plug out of the socket before cleaning or per-
u
forming maintenance on the vacuum cleaner, making
Hz 50–60
tool adjustments, changing accessories or putting
l 19/15
away the vacuum cleaner. This safety measure prevents
l 11.5
the vacuum cleaner from being started accidentally.
l 7.5
Fitting the vacuuming accessories (see figure A)
The vacuum hose (17) is equipped with a clip system which
hPa 202
can be used to connect vacuuming accessories (dust extrac-
hPa 215
tion adapter (18), curved nozzle (19)).
Fitting the nozzles and tubes
l/s 50
– Push the curved nozzle (19) onto the vacuum hose (17)
3
m /s 0.05 until you hear both snap fasteners (24) on the vacuum
hose engage.
l/s 62
– Then attach the required extraction accessory (coarse
3
m /s 0.062
dirt nozzle, crevice nozzle, suction tube, etc.) firmly to
W 245
the curved nozzle (19).
2
– To remove the adapter, press the snap fasteners (24) in-
m 0.28
wards and pull apart the components.
L
Fitting the dust extraction adapter
kg 6.4
– Push the dust extraction adapter (18) onto the vacuum
hose (17) until you hear both snap fasteners (24) on the
/I
vacuum hose engage.
A)
Rated voltage Maximum
power
230 V 2000 W
230 V 2000 W
230 V 1700 W
230 V 1100 W
230 V 1100 W
(triax vector sum) and uncertainty K
h
2 2
, K = 1.5 m/s .
1 609 92A 6U1 | (07.10.2021)
English | 15
GAS 20 L SFC
IPx4
Minimum power
100 W
100 W
100 W
100 W
100 W