Product Description And Specifications; Product Features - Bosch GAS 20 L SFC Professional Notice Originale

Masquer les pouces Voir aussi pour GAS 20 L SFC Professional:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
14 | English
away the vacuum cleaner. This safety measure prevents
the vacuum cleaner from being started accidentally.
Ensure that the workplace is well ventilated.
u
The vacuum cleaner should be repaired exclusively by
u
a qualified professional using only genuine spare
parts. This will ensure that the safety of the vacuum
cleaner is maintained.
The dust extractor contains dust
WARNING
particles that pose a risk to health.
Emptying and maintenance procedures, including the
disposal of dust containers, should only be carried out by
professionals. Suitable protective equipment is re-
quired. Do not operate the vacuum cleaner unless the
complete filter system is correctly inserted. Otherwise,
you are putting your health at risk.
Before using the equipment for the first time, check
u
that the vacuum hose is in perfect condition. Leave
the vacuum hose fitted to the vacuum cleaner while
doing this so that no dust escapes accidentally. Other-
wise, you may end up inhaling dust particles.
Do not sit on the vacuum cleaner. You can damage the
u
vacuum cleaner this way.
Take care when using the power cable and the vacuum
u
hose. Improper use of these can put other people at risk.
Do not clean the vacuum cleaner by spraying a jet of
u
water directly at it. Water entering the top of the va-
cuum cleaner will increase the risk of electric shock.
Connect the dust extractor to a properly earthed
u
power supply system. The plug socket and extension
cable must have a fully functioning protective conductor.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The following symbols may provide you with important in-
formation pertaining to the use of your dust extractor. Please
take note of these symbols and their meaning. Knowing what
these symbols mean will help you to use your extractor more
effectively and more safely.
Symbols and their meaning
WARNING! Read all the safety and gen-
eral instructions. Failure to observe the
safety and general instructions may res-
ult in electric shock, fire and/or serious
injury.
1 609 92A 6U1 | (07.10.2021)
Symbols and their meaning
Dust extractor from dust class L in ac-
cordance with IEC/EN 60335-2-69 for
the dry extraction of harmful dusts with
an exposure limit of > 0.1 mg/m
WARNING! The dust extractor contains
dust particles that pose a risk to
health. Emptying and maintenance
procedures, including the disposal of
dust containers, should only be carried
out by professionals. Suitable protect-
ive equipment is required. Do not oper-
ate the dust extractor without the com-
plete filter system. Doing so puts your
health at risk.
Product Description and
Specifications
fire and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The dust extractor is intended for collecting, vacuuming,
conveying and separating non-flammable dry dusts, non-
flammable liquids and a water-air mixture. The dust extrac-
tion capability of the dust extractor has been tested and cor-
responds to dust class L. It is suitable for the increased de-
mands in professional use, e.g. in trade, industry and work-
shops.
Dust extractors from dust class L in accordance with IEC/
EN 60335‑2‑69 may only be used to vacuum and extract
harmful dust with an exposure limit of > 1 mg/m³.
Only use the dust extractor if you can fully evaluate all func-
tions and carry them out without restrictions, or if you have
received corresponding instructions.

Product features

The numbering of the product features refers to the repres-
entation of the vacuum cleaner on the graphic pages.
(1) Container
(2) Hose adapter
(3) Plug socket for power tool
(4) On/off button
(5) Carrying handle
(6) Top part of dust extractor
(7) Catch for top part of dust extractor
(8) Wheel
3
Read all the safety and
general instructions. Fail-
ure to observe the safety
and general instructions
may result in electric shock,
Bosch Power Tools

Publicité

Table des Matières
loading

Table des Matières