Types Of Effects; Beat Color Fx/Sound Color Fx Effect Types; Types Of Beat Effect - Pioneer DJM-850-K Mode D'emploi

Types of effects

BEAT COLOR FX/SOUND COLOR FX effect types

Effect Name [BEAT] button status
Off
NOISE
On
Off
GATE
On
Off
CRUSH
On
Off
FILTER
On

Types of BEAT EFFECT

DELAY
1
A delay sound is output once according to the beat fraction set with the
[BEAT c, d] buttons.
When 1/2 beat delay sound is added, 4 beats become 8 beats.
Original
(4 beats)
1/2 delay
(8 beats)
BEAT c, d buttons
(parameter 1)
TIME control (parameter 2)
LEVEL/DEPTH control
(parameter 3)
ECHO
1 2
A delay sound is output several times and gradually attenuated accord-
ing to the beat fraction set with the [BEAT c, d] buttons.
With 1/1 beat echoes, the delay sounds are faded out according to the
track's tempo even after the input sound has been cut.
18
En
Descriptions
White noise generated inside this unit is mixed in to the
sound of the channel via the filter and output.
! The volume can be adjusted by turning the [TRIM] controls
for the respective channels. The sound quality can be
adjusted by turning the [EQ/ISO (HI, MID, LOW)] controls.
The volume changes in association with the beat.
The gate effect makes the sound tighter and reduces the
sense of volume.
The sound is recorded while the gate is open, and when the
gate is closed, the recorded sound is output several times.
Changes the original sound to a crushed-like sound for
output.
The distortion changes in association with the beat.
Outputs sound that has passed through a filter.
The filter's cut-off frequency changes in association with
the beat.
Use these to set a time delay of 1/8 – 16/1 with
respect to the time of one beat of the BPM.
Use this to set the delay time.
1 to 4000 (ms)
Use this to set the balance between the original
sound and the delay sound.
[COLOR] control
Turn counterclockwise: The cut-off frequency of the filter
through which the white noise passes gradually decreases.
Turn clockwise: The cut-off frequency of the filter through
which the white noise passes gradually increases.
Turn counterclockwise: The cut-off frequency of the filter
through which the white noise passes gradually decreases.
Turn clockwise: The cut-off frequency of the filter through
which the white noise passes gradually increases.
Turn counterclockwise: The gate effect is applied to the
medium and high frequencies.
Turn clockwise: The gate effect is applied to the low and high
frequencies.
Turn counterclockwise: The gate effect is applied to the medium
and high frequencies, and the sampled sound is added.
Turn clockwise: The gate effect is applied to the low and high
frequencies, and the sampled sound is added.
Turn counterclockwise: Increases the sound's distortion.
Turn clockwise: The sound is crushed before passing through
the high pass filter.
Turn counterclockwise: Increases the sound's distortion.
Turn clockwise: The sound is crushed before passing through
the high pass filter.
Turn counterclockwise: Gradually decreases the low-pass
filter's cutoff frequency.
Turn clockwise: Gradually increases the high-pass filter's
cutoff frequency.
Turn counterclockwise: Gradually decreases the low-pass
filter's cutoff frequency.
Turn clockwise: Gradually increases the high-pass filter's
cutoff frequency.
1 beat
BEAT c, d buttons Use these to set a time delay of 1/8 – 16/1 with
(parameter 1) respect to the time of one beat of the BPM.
Use this to set the delay time.
TIME control (parameter 2)
1 to 4000 (ms)
LEVEL/DEPTH control Use this to set the balance between the original
(parameter 3) sound and the echo sound.
UP ECHO
1 2
A delay sound is output several times and gradually attenuated accord-
ing to the beat fraction set with the [BEAT c, d] buttons.
With 1/1 beat echoes, the delay sounds are faded out according to the
track's tempo even after the input sound has been cut.
Also, it is also possible to change the pitch of the echo sound.
1 beat
BEAT c, d buttons Use these to set a time delay of 1/8 – 16/1 with
respect to the time of one beat of the BPM.
(parameter 1)
Use this to set the delay time.
TIME control (parameter 2)
1 to 4000 (ms)
Use this to set the balance between the original
LEVEL/DEPTH control
sound and the echo sound and to set the amount by
(parameter 3)
which the echo sound's pitch changes.
Input sound turned off
Fade-out
Time
Input sound
Fade-out
turned off
Time