Pioneer DJM-850-K Mode D'emploi page 20

SLIP ROLL
1 2
The sound being input at the point when the [ON/OFF] is pressed is
recorded, and the recorded sound is output repeatedly according to the
beat fraction set with the [BEAT c, d] buttons.
When the effect time changes, the input sound is recorded again.
Original
Changed from 1/2
Effect turned on
to 1/1
Roll
1/2 repeat
BEAT c, d buttons
(parameter 1)
TIME control (parameter 2)
LEVEL/DEPTH control
(parameter 3)
ROLL
1 2
The sound being input at the point when the [ON/OFF] is pressed is
recorded, and the recorded sound is output repeatedly according to the
beat fraction set with the [BEAT c, d] buttons.
Original
Effect turned on
1/1 roll
Repeated
BEAT c, d buttons
(parameter 1)
TIME control (parameter 2)
LEVEL/DEPTH control
(parameter 3)
REV ROLL
1 2
The sound being input at the point when the [ON/OFF] button is pressed
is recorded, and the recorded sound is reversed then output repeatedly
according to the beat fraction set with the [BEAT c, d] buttons.
Original
Effect turned on
1/1 reverse
roll
Reversed and repeated
BEAT c, d buttons
(parameter 1)
TIME control (parameter 2)
LEVEL/DEPTH control
(parameter 3)
20
En
1/1 repeat
Use these to set an effect time of 1/16 – 16/1 with
respect to the time of one beat of the BPM.
Use this to set the effect time.
10 to 4000 (ms)
Use this to set the balance between the original
sound and ROLL.
Use these to set an effect time of 1/16 – 16/1 with
respect to the time of one beat of the BPM.
Use this to set the effect time.
10 to 4000 (ms)
Use this to set the balance between the original
sound and ROLL.
Use these to set an effect time of 1/16 – 16/1 with
respect to the time of one beat of the BPM.
Use this to set the effect time.
10 to 4000 (ms)
Use this to set the balance between the original
sound and ROLL.
SND/RTN
1
Connect an external effector, etc., here.
SEND
RETURN
POWER
MIC USB MASTER MIDI
LEVEL START
MIC1 CD/LINE PHONO USB CD/LINE LINE USB CD/LINE LINE USB CD/LINE PHONO USB ON/ OFF / STOP SETUP
1/2 3/4 5/6 7/8
WAKE UP
TRIM TRIM TRIM TRIM BEAT EFFECTS
OVER OVER OVER OVER 0
OVER
10 10 10 10 10
9 9 9 9
7 7 7 7 7
MIC 1 HI HI HI HI CH SELECT
4 4 4 4 4 1 2 3 4
0 LEVEL MIC A B MST
2 2 2 2 2
PARAMETER
MIC 2 1 1 1 1 1
AUTO
TAP BPM
0 0 -26 / 6 0 -26 / 6 0 -26 / 6 0 -26 / 6 0 %
ms
- 1 MID - 1 MID - 1 MID - 1 MID - 1
HI - 2 - 2 - 2 - 2 - 2
EQ/ EQ/ EQ/ EQ/
- 3 ISO - 3 ISO - 3 ISO - 3 ISO - 3
12 12 EQ
- 5 - 5 - 5 - 5 - 5
LOW -26 / 6 -26 / 6 -26 / 6 -26 / 6
- 7 LOW - 7 LOW - 7 LOW - 7 LOW - 7
12 12 -10 -10 -10 -10 -10 BEAT
TALK
OFF ON OVER -15 -15 -15 -15 -15
-24 -24 -24 -24 -24
/ 6 / 6 / 6 / 6 AUTO TAP
dB -26 dB -26 dB -26 dB -26 L dB R / TAP
BEAT BEAT BEAT BEAT
COLOR COLOR COLOR COLOR BALANCE
NOISE GATE
SOUND COLOR FX CUE
CRUSH FILTER
LOW HI LOW HI LOW HI LOW HI L R
FILTER FLANGER
CUE CUE CUE CUE CUE TRANS PHASER
FADER START REVERB ROBOT
SPIRAL SLIP ROLL
1 2 3 4 UP ECHO ROLL
MONO STEREO
ECHO REV ROLL
DELAY SND/ RTN
4 MIC
10 10 10 3 CF.A
HEAD PHONES 9 9 9 2 CF.B
8 8 8 BOOTH MONITOR
MONO SPLIT STEREO 1 MASTER
7 7 7
6 6 6
5 5 5
TIME
MIXING 4 4 4
3 3 3
0
2 2 2
EQ CURVE
1 1 1 ISOLATOR EQ
0 0 0
CUE MASTER
LEVEL LEVEL / DEPTH
CH FADER
A THRU B A THRU B A THRU B A THRU B
0 MIN MAX
CROSS FADER
CROSS FADER ASSIGN ON / OFF
PHONES
A B
DJM-850
BEAT c, d buttons
—
(parameter 1)
TIME control (parameter 2) —
LEVEL/DEPTH control This adjusts the sound level input to the [RETURN]
(parameter 3) terminal.
1 If the sound of the channel you want to monitor is not output from
the [MASTER] channel when [CF.A], [CF.B] or [MASTER] is selected
with the [1, 2, 3, 4, MIC, CF.A, CF.B, MASTER] selector switch, the
effect sound cannot be monitored even by pressing the [CUE] button
for [BEAT EFFECTS].
2 If the effect is off, the effect sound cannot be monitored even by
pressing the [CUE] button for [BEAT EFFECTS].
Effector