Types Of Beat Effect; Multi Tap Delay - Pioneer DJM-2000NXS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Types of BEAT EFFECT

DELAY
1
Original
(4 beats)
1/2 delay
(8 beats)
This function outputs a delay sound once according to the beat button's
fraction.
When 1/2 beat delay sound is added, 4 beats become 8 beats.
Use these to set the delay time from 1/8 to 4/1 with
Beat buttons (parameter 1)
respect to 1 beat of BPM time.
Use this to set the delay time.
TIME control (parameter 2)
1 to 4000 (ms)
LEVEL/DEPTH control
Use this to set the balance between the original
(parameter 3)
sound and the delay sound.
EFFECT FREQUENCY
Use these to set the balance between the original
(parameter 4)
sound and the delay sound for the different bands.
ECHO
1 2
Input sound turned off
1 beat
This function outputs increasingly attenuated delay sounds several
times according to the beat button's fraction.
With 1/1 beat echoes, the delay sounds are faded out according to the
track's tempo even after the input sound has been cut.
Use these to set the delay time from 1/8 to 4/1 with
Beat buttons (parameter 1)
respect to 1 beat of BPM time.
Use this to set the delay time.
TIME control (parameter 2)
1 to 4000 (ms)
LEVEL/DEPTH control
Use this to set the balance between the original
(parameter 3)
sound and the echo sound.
EFFECT FREQUENCY
Use these to set the balance between the original
(parameter 4)
sound and the echo for the different bands.

MULTI TAP DELAY

1
MIN
MAX
1/1 beat
MIN
MAX
1/4 beat
MIN
MAX
EFFECT FREQUENCY
1/8 beat
This function outputs up to 7 delay sounds in 1/8 units, according to the
beat button's fraction.
The volume of the delay sound can be adjusted with the
[EFFECT FREQUENCY] controls.
The volume of the odd delay sounds is adjusted from [MIN] to the center
position, the volume of the even delay sounds is adjusted from the cen-
ter position to [MAX].
The effect time is set from 1/8 to 4/1 with respect to
Beat buttons (parameter 1)
1 beat of BPM time.
Use this to set the delay time.
TIME control (parameter 2)
10 to 4000 (ms)
LEVEL/DEPTH control
Use this to set the balance between the original
(parameter 3)
sound and the delay sound.
EFFECT FREQUENCY
This sets the volume of the delay sound for the
(parameter 4)
different bands.
Fade-out
Time
Time
REVERB
1 2
Direct sound
Early reflected sound
Level
Reverberations
1%
100%
This function adds a reverberation effect to the input sound.
Beat buttons (parameter 1)
Set the reverberation effect and room size.
Set the reverberation effect and room size to a
TIME control (parameter 2)
number between 1 and 100 (%)
LEVEL/DEPTH control
Sets the balance between the original sound and the
(parameter 3)
effect sound.
EFFECT FREQUENCY
Use these to set the balance between the original
(parameter 4)
sound and the effect sound for the different bands.
ROLL
1 2
Original
Effect turned on
1/1 roll
Repeated
This function records the input sound at the point at which the [ON/OFF]
button is pressed and repeats the recorded sound according to the beat
button's fraction.
The effect time is set from 1/8 to 4/1 with respect to
Beat buttons (parameter 1)
1 beat of BPM time.
Use this to set the effect time.
TIME control (parameter 2)
10 to 4000 (ms)
LEVEL/DEPTH control
Use this to set the balance between the original
(parameter 3)
sound and ROLL.
EFFECT FREQUENCY
Use these to set the balance between the original
(parameter 4)
sound and the ROLL for the different bands.
SLIP ROLL
1 2
Original
Changed from 1/2
Effect turned on
to 1/1
Roll
1/2 repeat
This function records the input sound at the point at which the [ON/OFF]
button is pressed and repeats the recorded sound according to the beat
button's fraction.
When the effect time changes, the input sound is recorded again.
The effect time is set from 1/8 to 4/1 with respect to
Beat buttons (parameter 1)
1 beat of BPM time.
Use this to set the effect time.
TIME control (parameter 2)
10 to 4000 (ms)
LEVEL/DEPTH control
Use this to set the balance between the original
(parameter 3)
sound and ROLL.
EFFECT FREQUENCY
Use these to set the balance between the original
(parameter 4)
sound and the ROLL for the different bands.
Time
1/1 repeat
25
En

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Djm-2000nexus

Table des Matières