Disposal; Plastics; Metals - Kemper MaxiFil Mode D'emploi

8 Disposal

WARNING
Skin contact with cutting fumes, etc. can cause skin irritation in
sensitive individuals!
Disassembly work on the MaxiFil may only be carried out by
trained and authorized personnel while complying with the safety
rules and the applicable accident prevention regulations!
Serious injury to the lungs and the respiratory tract is possible!
In order to avoid contact with and inhalation of dust, use
protective clothing, gloves and a powered air respirator such as
the KEMPER autoflowXP or a dust filter mask belonging to
Class FFP2 as per EN 149.
The release of hazardous dusts during disassembly is to be
avoided to ensure that persons who are not involved with the task
are not affected.
CAUTION
Comply with the legal obligations on waste prevention and correct
recycling/disposal during all work on and with the MaxiFil!

8.1 Plastics

The plastics used must be sorted by type as far as possible.
Plastics must be disposed of in compliance with the legal requirements.

8.2 Metals

Different metals must be separated and disposed of. Disposal must be
carried out by an authorized company.
Art.-Nr.: 150 2489
Technical changes and errors excepted.
KEMPER MaxiFil Operating Instructions - EN
- 64 - Rev.: 01
Latest update: 06/2015